Xerox Legacy 4110 Page 80 User Manual Download

Page: 80 / 520

Xerox 4590/4110 Copier/Printer User Guide

2-52

2. Copy

Copy Booklet

If you wish to make booklets from an original that is already a

booklet, select

Copy Booklet

. The original will be scanned as is

by specifying Bi-fold/Stapling without having to specify Booklet

Imposition.

Covers

You can attach a cover to a booklet. Selections for covers are as

follows:

•

No Covers
No cover is added.

•

Blank Covers
A blank sheet of paper is attached as the cover.

•

Printed Covers - 2 Sided
The document is copied to the cover from the first page.

•

Printed Covers - Print Outside
The document is copied to only the outside of the cover.

Last Original as Back Cover

Pastes the final image to the last page of the booklet as Back

Cover. Check when specifying the last page as the back cover.

When using

Subsets

to divide a booklet, final image is pasted to

the last page of the last division set.

NOTE: A blank page may be inserted just before the last page to
ensure correct pagination.

Gutter

Displays the

Booklet Creation - Gutter

screen.

Finishing

Displays the

Booklet Creation - Finishing

screen.

Paper Tray Settings

Displays the

Booklet Creation - Paper Tray Settings

screen.

NOTE: This only displays when Covers is selected.

Select the paper tray from

Cover Tray

and

Text Tray

. Select trays

with paper of the same size and orientation for the text and the

cover.
When

Bypass

is selected, the

Tray 5 (Bypass)

screen appears.

For more information, refer to “Tray 5 (Bypass) Screen” on

page 2-21.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands