Xerox Legacy 4110 User Manual Download Page 345

Page: 345 / 520

Xerox 4590/4110 Copier/Printer User Guide

9-21

9. Machine Status

Print Mode Settings

From the

Print Report/List

screen, select

Print Mode

Settings

Select the report/list to be printed.

Press the

Start

button.

NOTE: The items displayed depend on the options that are

installed.

Settings List - Common Items

You can check the hardware configuration of the machine,

network information, and the print feature and copy feature setting

status.

NOTE: The same content is printed for the Settings List

regardless of whether you print from Copy Mode
Settings, Print Mode Settings or Scan Mode Settings.

PCL Settings List

This prints settings for PCL virtual printers.

PDF Settings List

This prints the various settings in PDF printer mode.

TIFF Settings List

This prints the various settings in TIFF printer mode.

TIFF Logical Printers List

This prints a list of the logical printers created in TIFF printer

mode.

PS Logical Printers List

This prints a list of the logical printers created in PostScript.

ESC/P settings list

This prints the various settings in ESC/P emulation mode.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 345 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: