Xerox Legacy 4110 Page 186 User Manual Download

Page: 186 / 520

Xerox 4590/4110 Copier/Printer User Guide

4-10

4. Mailbox Management

Copy

This feature allows you to copy the selected document to another

mailbox.

Select

Copy

Select a mailbox to which a document will be copied and
select

Save

NOTE:

If a password is set for the mailbox, the password

entry screen appears. Enter the password and select
Confirm. Ask the System Administrator for the password.

NOTE:

If the mailbox is full, the document cannot be copied

to that mailbox.

Document List

The

Copy to Mailbox-Document List

screen displays.

For more information, refer to “Copy to Mailbox-Document List

screen” on page 4-11.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands