Xerox Legacy 4110 User Manual Download Page 163

Page: 163 / 520

Xerox 4590/4110 Copier/Printer User Guide

3-39

3. Scan

2 Sided Originals

This feature is the same as

2 Sided Originals

on the

Basic Scanning

tab. For more information, refer to “2 Sided

Originals” on page 3-39.

Book Scanning Bound Originals

The

Bound Originals

Book Scanning feature allows you to scan

facing pages of a document on separate sheets of paper in page

order.
This feature is useful if you need to make separate scans from

facing pages of bound originals such as a booklet.

NOTE: The document feeder does not support this feature.

A document of non-standard size or undetectable size may
not be divided exactly into two.

From the

Scan Options

tab, select

Book Scanning Bound

Originals

Select any item.

Select

Save

to keep your choices.

Off

Do not scan bound originals.

Left Page then Right

Scans are made from the left page of facing pages in a document

starting from the left page.

Right Page then Left

Scans are made from the right page of facing pages in a

document starting from the right page.

Top Page then Bottom

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 163 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: