Xerox Legacy 4110 User Manual Download Page 339

Page: 339 / 520

Xerox 4590/4110 Copier/Printer User Guide

9-15

9. Machine Status

User Account Billing Meter

If the Login Setup/Auditron Administration feature is enabled, you

can check the billing meter for the currently authenticated UserID.
For information about the Login Setup/Auditron Administration

feature, refer to “Login Setup/Auditron Mode” in the System

Administration Guide or ask your System Administrator for help.

Press the

Log In/Out

button.

Enter a UserID with the numeric keypad, and select

Confirm

To Check the Billing Meter for the Currently Authenticated
UserID

a) Enter the UserID for the user for which you want to check

the billing meter.

NOTE: If a password is required, enter the password.

b) Continue to Step 3 below.

To Check the System Administrator Meter

a) Enter the UserID for System Administration mode.

NOTE: If a password is required, enter the password.

b) Select

User Mode

c) Press the

Machine Status

button.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 339 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: