Xerox Legacy 4110 User Manual Download Page 412

Page: 412 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-34

11. Problem Solving

016-703

Cause

Mail specifying a non-registered or invalid mailbox

number. was received.

Remedy

Take one of the following actions:

Request the sender to register the mailbox with the

specified number.

Request the sender to send to a valid mailbox.

016-704

Cause

Documents stored in the mailbox have reached the hard

disk capacity limit.

Remedy

Remove unnecessary documents from the mailbox, and

save the document.

Refer to “Delete Documents in the Scan & Other Jobs Mailbox” on

page 4-73.

016-705

Cause

Secure print documents cannot be registered because of

hard disk malfunction.

Remedy

Contact the Customer Support Center.

Refer to “Secure Print” on page 8-6.

016-706

Cause

The maximum number of Secure Print users has been

exceeded and no space is available on the hard disk.

Remedy

Remove unnecessary documents stored on the printer,

and delete unnecessary Secure Print users.

For information about Secure Print, refer to “Secure Print” on

page 8-6. For information about mailboxes, refer to “Delete

Documents in the Scan & Other Jobs Mailbox” on page 4-73.

016-707

Cause

Unable to sample print because the feature expansion

kit is not installed or has malfunctioned.

Remedy

A feature expansion kit is needed to use the Sample

Print feature. If the kit is malfunctioning, contact the

Customer Support Center.

016-708

Cause

Annotation is not possible due to insufficient hard disk

space.

Remedy

Remove unnecessary data from the hard disk to

increase free disk space.

016-709

Cause

An error occurred during PCL processing.

Remedy

Retry printing.

016-710

Cause

Delayed Print documents cannot be registered because

of hard disk malfunction.

Remedy

Contact the Customer Support Center.

016-711

Cause

The configured maximum e-mail size has been

exceeded.

Remedy

Take one of the following actions and resend the e-mail:

Decrease document pages

Reduce the Scan Resolution

Reduce the Scan Magnification

Have the system administrator increase your

Maximum Send E-mail Data Size

016-712

Refer to 003-751.

Error Code

Category

Cause and Remedy

C P S M O

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 412 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: