manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 107 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 107

Xerox 4590/4110 Copier/Printer User Guide

2-79

2. Copy

„

Paper Supply

Select paper tray for loading index paper.

NOTE: Paper Supply icon does not display if Off is selected. 

When loading the tab paper in Tray 5 (Bypass), load the 
paper with the side to be copied facing up and with the 
edge opposite to the tab to be fed first. When loading the 
tab paper in tray 3 or 4, load the paper with the side to be 
copied facing down and with the edge opposite to the tab 
aligning to the left side of the tray.

You can load the tab paper in tray 3 to 4 only when 
selecting Tabbed Stock 1 105-216g/m2.

„

Tab Stock Size

Select the size of index paper.

„

Tab Stock Type

Select the quality of index paper.

Output Orientation

You can select whether copies should be output facing up or 

down.

1.

From the 

Output Format 

tab, select 

Output Orientation

.

2.

Select any item.

3.

Select 

Save 

to keep your choice.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments