manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 449 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 449

Xerox 4590/4110 Copier/Printer User Guide

11-71

11. Problem Solving

3.

Return lever 2b to the original position. 

4.

Close the Finisher right cover.

NOTE: A message will be displayed and the machine will not 

operate if the Finisher right cover is even slightly open.

Paper jams at knob 2c, levers 2e/2f and tri-fold output tray 2d.

1.

Make sure that the machine has stopped and then open the 
right cover on the light finisher. 

2.

Pull out the tri-fold output tray 2d, swing lever 2e to the right, 
and remove the jammed paper.

NOTE: If paper is torn, check for any torn pieces of paper inside 

the machine.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments