manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 291 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 291

Xerox 4590/4110 Copier/Printer User Guide

7-17

7. Paper and Other Media

5.

Load and align the edge of the paper against the right edge 
of the tray with the side to be copied or printed on facing up.

KEY POINT:

Do not load paper exceeding the maximum fill line. 

Doing so might cause paper jams or machine trouble.

6.

Push the tray in gently until it comes to a stop.

NOTE: Affix the paper size label to the front of the paper tray.

Change the paper size in the optional OHCF (Tray 6) 

NOTE: This optional tray is not available with the 4590 Copier/
Printer.

1.

Pull out the tray towards you until it stops. 

WARNING:

When pulling out the paper tray, do it slowly. If pulled 

out with too much force, the tray can hit and injure your knees.

2.

Remove any paper loaded on the tray.

3.

Squeeze the handle on the paper guide (A) and slide the 
guide to the desired paper size. Squeeze the handle on the 

paper guide (B) and slide the guide to the desired paper 

size.

4.

Load and align the paper stack in the lower right corner of 

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments