Xerox Legacy 4110 User Manual Download Page 490

Page: 490 / 520

Xerox 4590/4110 Copier/Printer User Guide

12-18

12. Specifications

List of Options

The following are the principal options available. To purchase

these, contact the Customer Support Center.

NOTE: The products are liable to change.

For the latest information, contact the Customer Support
Center.

Product name

Description

Optional High Capacity

Feeder (HCF)

Allows you to load papers on tray 6 and 7. A wing table to put

documents on comes with this product.

Oversized High Capacity

Feeder (OHCF)*

*Not available with the 4590

Copier/Printer

1 tray feeding device (Tray 6) that accommodates large stock

sizes including 8.5 x 11 in /A4 up to 13 x 19 in. If installed, this

unit replaces any existing HCF.

Folder Module

Enables you to output Z-folded copies.

Note:

It is available when Finisher D or Finisher D2 or Booklet

Finisher D or Booklet Finisher D

is installed.

Booklet Maker

This option allows you to create Booklets with or without

saddle stitching and bi-fold. This option is available on both the

D and D2 finishers.

Printer Upgrade Kit

Allows a DC (copier only) machine to be updated to a ST

(Network Print) enabled system

Mobility Plates

These plates allow the Xerox 4110 system to be installed on

uneven floor or heavy carpet.

Data Security Kit

This kit increases the security of data written to the hard disk.

Network Accounting Kit

(Job Base Account Kit)

Allows you to keep track of the user accounts via an external

authentication server.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 490 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: