Xerox Legacy 4110 Page 200 User Manual Download

Page: 200 / 520

Xerox 4590/4110 Copier/Printer User Guide

4-24

4. Mailbox Management

Separators

This feature allows you to insert separators between merged

documents, or merge multiple documents without any chapter

divisions.

Select

Separators

Select an item.

Select a paper tray for separators if

Blank Separators

Printed Separators

are selected.

Blank Separator

is selected, enter the number of separators

to be inserted using [

] and [

] or the numeric keypad.

No Separators

No separators are inserted.

Blank Separators

Blank separators are inserted. The number of separators can be

set within the range from 1to 99, as necessary.

Printed Separators

When multiple documents are merged, the first page of each

documents is set as a separator.

No Chapter Start

If a 2 sided document is merged to another document, the merged

documents will become one 2 sided document without any

chapter divisions.

Separators Tray

Paper trays for separators can be selected.
Separators Number of separators can be set within the range from

1 to 99.

Separators

Number of separators can be set within the range of 1-99.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands