Xerox Legacy 4110 User Manual Download Page 95

Page: 95 / 520

Xerox 4590/4110 Copier/Printer User Guide

2-67

2. Copy

Annotation - Date Screen

You can make copies with a date added. The printed date is the

date and time that the copy was made.
For information about the date display format, refer to "Date

Format" in the System Administration Guide.

From the

Output Format

tab, select

Annotation

and then

select

Date

Make a selection.

Select

Save

to keep your choices.

Off

No date is added.

A date is added.

Print On...

Displays the

Annotation - Date - Print On

screen.

You can select the page(s) to print the date from

First Page Only

and

All Pages

Position

Displays the

Annotation - Date - Position

screen.

Size

Displays the

Annotation - Stamp - Size

screen.

You can select from three sizes for the date.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 95 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: