Xerox Legacy 4110 Page 497 User Manual Download

Page: 497 / 520

Xerox 4590/4110 Copier/Printer User Guide

13-1

13. Safety information and Notices

Safety notices

This Xerox product and the recommended supplies are designed

and tested to meet strict safety requirements. These include

safety agency approval and compliance to established

environmental standards. Please read the following instructions

carefully before operating the product, and refer to them as

needed to ensure the continued safe operation of your product.

KEY POINT:

The safety testing and performance of this product

have been verified using Xerox materials only.

WARNING:

Any unauthorized alteration, which may include the

addition of new functions or connection of external devices, may

impact the product certification. Please contact your authorized

local dealer for more information.

Electrical safety

This product shall be operated from the type of electrical supply

indicated on the product data plate label. If you are not sure that

your electrical supply meets the requirements, please consult your

local power company for advice.
•

Use only the power cord supplied with this equipment.

•

This equipment is to be used on a branch circuit that has

larger capacity than rated ampere and voltage of the machine.

See data plate on the rear panel for the rated ampere and

voltage of this equipment. If the machine needs to be moved

to a different location, contact a Xerox Service Representative

or your authorized local representative or service support

organization.

•

Plug the power cord directly into a correctly grounded

electrical outlet. Do not use an extension cord. If you do not

know whether or not an outlet is grounded, consult a qualified

electrician.

•

Do not use a ground adapter plug to connect this equipment to

an electrical outlet that lacks a ground connection terminal.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands