manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 443 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 443

Xerox 4590/4110 Copier/Printer User Guide

11-65

11. Problem Solving

Paper jams at lever 3b and 3d

1.

Make sure that the machine has stopped and then open the 
right cover on the light finisher. 

2.

Move levers 3b and 3d to the left, and remove the jammed 
paper. 

NOTE: If paper is torn, check for any torn pieces of paper inside 

the machine.

3.

Return levers 3b and 3d the original position. 

4.

Close the Finisher right cover.

NOTE: A message will be displayed and the machine will not 

operate if the Staple Finisher's right cover is even slightly 
open.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments