manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 35 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 35

Xerox 4590/4110 Copier/Printer User Guide

2-7

2. Copy

1.

Select 

Next Original

 while scanning is in progress. 

NOTE 1:

The Next Original option does not automatically 

display. To use this feature, activate Build Job by selecting Job 
Assembly Build Job On.

NOTE 2:

When using the document feeder, load the next 

document after the machine has finished scanning the first 
document.

2.

Load the next document. 

3.

Press the 

Start

 button. If you have more documents, load 

the next document and press the 

Start

 button. 

4.

When all documents have been scanned, select 

Last 

Original

.

Step 5 Confirm the Copy Job in the Job Status

1.

Press the 

Job Status

 button. 

Job Status

 

button

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments