Xerox Legacy 4110 Page 377 User Manual Download

Page: 377 / 520

Xerox 4590/4110 Copier/Printer User Guide

10-23

10. Maintenance

NOTE: If it is difficult to remove dirt, try gently wiping with a soft
cloth moistened with a small amount of neutral detergent.

Once the second-side scanning assembly is clean, return the
document cover to its original position and ensure that the

lever is locked in place.

If you touch the document cover with your bare hands, wipe it

clean before closing the DADF.

Gently close the DADF.

Cleaning the Document Feeder Rollers

If the machine is equipped with a document feeder and the

document feeder rollers are dirty, dirt may appear on copies and

the machine may not properly detect document sizes.
To ensure that clean copies are made, clean this area about once

a month.

CAUTION:

Do not use benzene, paint thinner, or other organic

solvents. Doing so might damage paint or coating on plastic parts.

Cleaning the machine with an excessive amount of water

may cause the machine to malfunction or damage

documents during copying or printing.

Lift the latch of the DADF top cover until it is completely open.

NOTE: When you fully open the cover, it enters a fixed position.
Open the cover gently.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands