Xerox Legacy 4110 Page 411 User Manual Download

Page: 411 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-33

11. Problem Solving

016-220

016-221

016-222

016-223

016-224

016-225

016-226

016-227

016-228

Cause

An error occurred in the document scanner.

Remedy

Power-cycle the machine. If the document scanner error

is not corrected by performing the relevant remedy,

contact the Customer Support Center.

016-450

Cause

The SMB host name already exists.

Remedy

Change the host name.

For information about network settings, refer to the System

Administration Guide.

016-454

Cause

Unable to retrieve IP address from DNS.

Remedy

Check the DNS configurations and IP address retrieve

method.

For information about network settings, refer to the System

Administration Guide.

016-503

Cause

Unable to resolve SMTP server name during E-mail

send.

Remedy

Check that the SMTP server settings from CWIS are

correct. Also, check the DNS server settings.

016-504

Cause

Unable to resolve POP3 server name during E-mail

send.

Remedy

Check that the POP3 server settings from CWIS are

correct. Also, check the DNS server settings.

016-505

Cause

Unable to login to POP3 server during mail send.

Remedy

Check that the user name and password used in the

POP3 server from CWIS are correct.

016-701

Cause

PCL print data could not be processed as there was

insufficient memory.

Remedy

Reduce resolution, cancel 2 Sided printing or N up, and

try to print again.

Refer to the online help for the print driver.

016-702

Cause

PCL print data could not be processed as there was

insufficient print page buffer.

Remedy

Take one of the following actions:

Set Print Mode to Speed Priority.

Use Ensure Print.

Increase the size of the print page buffer.

Add on memory.

For information about print modes and print guarantees, refer to the

online help for the print driver. For information about memory, refer

to “Allocate Memory” in the System Administration Guide.

Error Code

Category

Cause and Remedy

C P S M O

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands