Xerox Legacy 4110 User Manual Download Page 49

Page: 49 / 520

Xerox 4590/4110 Copier/Printer User Guide

2-21

2. Copy

Tray 5 (Bypass) Screen

If you want to make copies on paper that cannot be loaded in

Trays 1 to 4 and 6 to 7, use Tray 5 (Bypass).

From the

Basic Copying

screen, in the

Paper Supply

area,

select

More...

Select the

Bypass

paper tray.

Select the paper size and paper type.

Select

Save

to save the changes.

NOTE: Select the up button to display the previous screen and
select the down button to display the next screen.

Paper Size

Select from

Auto Size Detect

Standard Size

, and

Non-Standard Size

When

Auto Size Detect

is selected, the paper size is identified

automatically.

NOTE: Auto Size Detect can only detect standard sizes.

Paper Type

Select the paper type.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 49 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: