manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 337 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 337

Xerox 4590/4110 Copier/Printer User Guide

9-13

9. Machine Status

Password

For PDF Emulation, if a password is set for a PDF file, set the 

same password to it in advance. Printing is performed only when 

the password for the file and the password entered here are the 

same. 
Password up to 32 characters long can be entered.

1.

Select 

Password

.

2.

Input the password and press 

Save

.

Billing Meter/Print Report

In the 

Billing Meter/Print Report

 screen, you can check the 

number of pages printed for each meter, or for each user. You can 

also print a report/list, check the job history, and settings/recorded 

values.

1.

Press the 

Machine Status

 button.

2.

Select the 

Billing Meter/Print Report 

tab.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments