Xerox Legacy 4110 Page 505 User Manual Download

Page: 505 / 520

Xerox 4590/4110 Copier/Printer User Guide

13-9

13. Safety information and Notices

Certifications in Europe

The CE marking that is applied to this product symbolizes Xerox

Declaration of Conformity with the following applicable Directives

of the European Union as of the dates indicated:

January 1, 1995:

Council Directive 73/23/EEC amended by Council Directive 93/68/

EEC, approximation of the laws of the member states related to

low voltage equipment.

January 1, 1996:

Council Directive 89/336/EEC, approximation of the laws of the

member states related to electromagnetic compatibility.

March 9, 1999

Council Directive 99/5/EC on radio equipment and

telecommunications terminal equipment and the mutual

recognition of their conformity.
A full declaration, defining the relevant directives and referenced

standards, can be obtained from your Xerox Limited

representative or by contacting:

Environment, Health and Safety

The Document Company Xerox

Bessemer Road

Welwyn Garden City

Herts

AL7 1HE

England

Tel 44 (0) 1707 353434

WARNING:

This product is certified manufactured and tested in

compliance with strict safety and radio frequency interference

regulations. Any unauthorized alteration which includes the

addition of new functions or the connection of external devices

may impact this certification. Please contact your local Xerox

Limited representative for a list of approved accessories.

WARNING:

In order to allow this equipment to operate in

proximity to Industrial, Scientific, and Medical (ISM) equipment,

the external radiation from the ISM equipment may have limited or

special mitigation measures taken.

WARNING:

This is a Class A product in a domestic

environment. This product may cause radio frequency

interference in which case the user may be required to take

adequate measures.

WARNING:

Shielded cables must be used with this equipment to

maintain compliance with Council Directive 89/336/EEC.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands