manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 131 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 131

Xerox 4590/4110 Copier/Printer User Guide

3-7

3. Scan

5.

If appropriate, select features to configure from each tab. 

For information about each of these features, refer to the sections 

listed below.
“Basic Scanning” on page 3-29
“Image Quality” on page 3-35
“Scan Options” on page 3-38
“Output Format” on page 3-47

Step 3 Start the Scan Job

1.

Press the 

Start

 button.

NOTE: If a problem occurs, an error message appears on the 
display. Remedy the error by following the message on the 
display.

„

If You Have More Documents

If you have more than one stack of documents to scan, select the 

Next Original

 button on the touch screen while the current stack 

of documents is being scanned. This allows you to scan several 

documents as one set of data.

NOTE: The Build Job feature must be enabled and switched on.

Up to 999 pages can be stored.

NOTE: If the number of document pages exceeds this maximum, 
then scanning stops. Follow the displayed message, and either 
abort the operation, or save the scanned document data. 

1.

While documents are being scanned, select 

Next Original

. 

NOTE: When using the 2 sided document feeder, the machine 
waits for the next set of documents after it has finished scanning 
the first set.

NOTE 2: When the above screen is displayed and no operation is 
performed after a certain period of time has elapsed, the machine 
automatically assumes that there are no more documents.

Start

 button 

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments