manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 27 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 27

Xerox 4590/4110 Copier/Printer User Guide

1-13

1. Product overview

Powering off

The procedure for turning the power off is as follows: 

CAUTION:

Switching off the power of the machine may cause 

loss of data being processed. 

1.

Before turning the power off, make sure that all copy or print 
jobs have completely finished. Also, make sure that the 

Online

 indicator is not lit.

KEY POINT:

Never turn the power off in the following instances:

•

While data is being received

•

While data is being sent (FTP/SMB/e-mail)

•

While jobs are being printed.

•

While jobs are being copied

•

While a scan is being executed

•

While data is being imported from computer

2.

Press the power switch to the   position. 

KEY POINT:

Power off processing is performed internally on the 

machine for a while after the power switch is turned off. Therefore, 

do not unplug the power cord from the power outlet immediately 

after turning the power switch off.

NOTE: If you turn the power back on after turning it off, first make 
sure that the display on the UI has gone out.

About the circuit breaker

The machine is provided with a circuit breaker. 

In the event of a current leakage, the breaker will automatically cut 

off the power circuit to prevent any leakage or fire from occurring.
The circuit breaker is normally On (“l”) position as shown in the 

figure above.
If the breaker is Off (“O”) position, contact your Customer Support 

Center as there might be some unusual conditions.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments