Xerox Legacy 4110 Page 388 User Manual Download

Page: 388 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-10

11. Problem Solving

Images on the

copy are

skewed.

Is the document loaded

correctly?

Load the document correctly.
Refer to “Step 1 Load Documents” on

page 2-1.

Is paper loaded properly in

the tray?

Load paper correctly.
Refer to “Load paper in Trays 1 and 2” on

page 7-4.

Is the paper guide for paper

tray 5 (manual feed) set so

that the tray touches the

paper?

Load paper correctly.
Refer to “Load paper in Tray 5 (Bypass)”

on page 7-6.

Is the document guides at
the correct position?

Load the document correctly, and align the
document guides with the edge of the

document.
Refer to “Step 1 Load Documents” on

page 2-1.

Is the paper tray set

properly?

Firmly push in the tray as far as possible to

set it properly.
Refer to “Load paper in Trays 1 and 2” on

page 7-4.

Part of the image

is missing on the

copy.

Is the paper damp?

If the paper is damp, either some parts of

the copy are not shown or the copy is

smudged and unclear. Replace with paper

from a new ream.
Refer to “Load paper in the trays” on

page 7-4.

Is the loaded paper folded

or wrinkled?

Remove the defective paper and replace

with paper from a new ream.
Refer to “Load paper in the trays” on

page 7-4.

Is the document pasted

together or folded in?

A probable cause is that the pasted or

folded in section is curling back, and has

risen up from the surface of the document

glass. Place a stack of white sheets on the

document to hold the document down flat

against the document glass.

A stripe pattern

appears in

copies.

Is too large a document

enlargement ratio set?

Stripes sometimes appear in copies at

some enlargement ratios. Adjust the copy

enlargement ratio.
Refer to “Reduce/Enlarge” on page 2-15.

Symptoms

Check

Remedy

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands