manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 470 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 470

Xerox 4590/4110 Copier/Printer User Guide

11-92

11. Problem Solving

Solving Curled Output

You can correct curling of the output by pressing the De-curl 

button.
The De-curl button functions both in operation and while the 

machine is idle if the power of the machine is on.

NOTE: To change the curling correction mode while the machine 

is in operation, press the De-curl button and then the 
change will be applied immediately.

Pressing the Reset button on the Control Panel cannot 
change the curling correction mode.

1.

Check how the output copy is curled. 

2.

Check the De-curl lights.

When turning on the power of this machine, the de-curl 
mode is set to Auto.

When you cancel the Power Saver Mode, the de-curl 
mode will be set to Auto.

3.

Press De-curl.   

NOTE: Pressing the De-curl button toggles the mode between 

Auto, ON, and OFF.

For more information, refer to “Mode and function of De-curl 

button” on page 11-93.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments