Xerox Legacy 4110 User Manual Download Page 62

Page: 62 / 520

Xerox 4590/4110 Copier/Printer User Guide

2-34

2. Copy

2 Sided Book Copy

You can assign pages when making copies of facing pages in a

bound document so that pages face each other in the same way

as the document. A blank sheet is inserted automatically as the

first page.

NOTE: Non-standard sized documents will not be separated into
two accurately.

On the

All Services

screen, select

Copy

, then the

Scan

Options

tab. From the

Scan Options

screen that appears,

select

2 Sided Book Copy

Select which page to copy first.

Select which pages to copy.

Make any required settings for

Center Erase

Select

Save

to save the changes.

NOTE: Confirm the orientation of the loaded document.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 62 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: