Xerox Legacy 4110 Page 383 User Manual Download

Page: 383 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-5

11. Problem Solving

Online

indicator

does not light

even though you

instructed it to

print.

Is the interface cable

disconnected?

Turn the power switch off, unplug the

power cord from the power outlet, and

check the interface cable connection.
For information about network settings,

refer to the System Administration Guide.

Is the environment correctly

set on the personal

computer?

Check the print driver and other

environment settings on the personal

computer.

Is the required interface

set?

Check the status of the interface port in

use.
For information about network settings,

refer to the System Administration Guide.

Printing is not

performed even

though printing

was instructed

on Tray 5

(Bypass).

Is paper of the size

specified for printing loaded

on the tray?

Follow the instructions displayed to load

paper of correct size and instruct it to print

again.
Refer to “Load paper in Tray 5 (Bypass)”

on page 7-6.

Unsatisfactory

print quality.

A probable cause is an

image defect.

Remedy the trouble referring to

Image

Quality Trouble

described later.

Refer to “Image Quality Problems” on

page 11-9.

Text is not

printed correctly

(text is

corrupted).

Non-standard fonts are

used for printing.

Check the application or print driver

settings.

Online

indicator

lights and copies

are not delivered

with Online still

lit.

Data remaining in machine

memory.

Cancel printing, or purge remaining data.
Refer to “Checking Current/Pending Jobs”

on page 8-3.

Cannot open or

close trays.

Did you open a cover or turn

power off during printing?

Turn the power off without unnecessarily

closing or opening a paper tray. Wait

several seconds and then turn the power

switch on. Make sure that the machine is

online (ready to receive data) and then

close or open the paper tray.

Symptoms

Check

Remedy

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands