Xerox Legacy 4110 User Manual Download Page 281

Page: 281 / 520

Xerox 4590/4110 Copier/Printer User Guide

7-7

7. Paper and Other Media

Load paper with the side to be copied or printed on facing
up, and insert the paper lightly along the paper guide on the

front side of the machine until it comes to a stop.

KEY POINT:

Do not load mixed size paper into the tray.

Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.

When loading a non-standard paper size from Tray 5
(Bypass), move the paper guides to accommodate the

paper.

Select copying or printing.

Load paper in optional (HCF) Trays 6 and 7

Pull out the tray towards you until it stops.

WARNING:

When pulling out the paper tray, do it slowly. If pulled

out with too much force, the tray can hit and injure your knees.

Load and align the edge of the paper against the right edge
of the tray with the side to be copied or printed on facing up.

NOTE: Do not load paper exceeding the maximum fill line. Doing
so might cause paper jams or machine trouble.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 281 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: