Xerox Legacy 4110 User Manual Download Page 408

Page: 408 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-30

11. Problem Solving

Error Code

This section explains error codes.
If an error caused the printing to end abnormally or a malfunction

occurred in the printer, then an error message code (***-***) is

displayed.
If an error code not described in the following tables is displayed,

or the problem persists even after you have tried the following

solutions, contact the Customer Support Center.
Refer to the following table for error codes and information on how

to rectify the problem.

KEY POINT:

If an error code is displayed, all print data of the

printer as well as print data stored in the built-in memory of

the machine is discarded.

Errors are divided into the following

Categories

•

: Copy

•

: Print

•

: Scan

•

: Mail

•

: Others Problems

Other Errors

Error Code

Category

Cause and Remedy

C P S M O

002-770

Cause

Unable to process job template due to insufficient hard

disk space.

Remedy

Remove unnecessary data from the hard disk to

increase free disk space.

003-750

Cause

Unable to store any documents with 2 Sided Book Copy

feature.

Remedy

Check the 2 Sided Book Copy settings.

Refer to “2 Sided Book Copy” on page 2-34.

003-751

Cause

The machine is unable to process size, because the

specified document area is too small.

Remedy

Increase resolution or scan area size.

003-753

Cause

The selected resolution was too large for scanning

mixed size originals using document feeder.

Remedy

Decrease Scan Resolution to 200dpi or less, and

rescan.

003-754

Cause

An error occurred in the document scanner.

Remedy

Reprocess the job.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 408 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: