Xerox Legacy 4110 User Manual Download Page 40 | Manualshive

Page: 40 / 520

Xerox Legacy 4110 User Manual Download Page 40

Xerox 4590/4110 Copier/Printer User Guide

2-12

2. Copy

Save Scanned Documents

Save scanned documents as a data to the mailbox on the

machine.
To use mailbox, select

Copy & Save

or

Save Only

.

NOTE: Mailboxes must be set up in order to use this feature.

The maximum pages stored in the machine is about
45,000 pages for the 8.5 x 11 inch or A4 portrait. This
figure should only be used as a guide, since the maximum
scanned pages depend on the types, sizes, and direction
of the document.

Up to 100 copied and printed documents can be stored
altogether.

1.

On the

All Services

screen, select

Copy

.

2.

Select

Copy & Save

or

Save Only

.

3.

Specify the mailbox to save data.

NOTE: If a password is set for the mailbox, the password entry
screen appears. Enter the password and select Confirm. If you
have forgotten the password, contact your System Administration.

«
...
38
39
40
41
42
...
»

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments