Xerox Legacy 4110 User Manual Download Page 431

Page: 431 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-53

11. Problem Solving

Paper Jams in Tray 5 (Bypass)

The following section describes how to remedy paper jams that

occur on Tray 5 (Bypass).

When optional high capacity feeder tray is not installed, open
the top cover of paper Tray 5 (Bypass).

Remove the jammed paper and all paper loaded in paper Tray
5 (Bypass).

KEY POINT:

When two or more sheets of paper are loaded,

remove all of the sheets from the tray.

NOTE: If paper is torn, check for any torn pieces of paper inside

the machine.

Fan the paper you removed making sure that all four corners
are neatly aligned.

Insert the paper into the tray with the printing side facing up
until its leading edge lightly comes up against the paper feed

entrance.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 431 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: