Xerox Legacy 4110 User Manual Download Page 341

Page: 341 / 520

Xerox 4590/4110 Copier/Printer User Guide

9-17

9. Machine Status

Reset Job Counters

You can reset the cumulative counts of scanned and printed

pages for each job.
This appears when the UserID for System Administration mode is

set and you have entered from

User Mode

in System

Administration mode.

Press the

Log In/Out

button.

Enter the UserID with the numeric keypad, and select

Confirm

NOTE: You may have to contact your System Administrator for

the correct UserID.

Select

User Mode

Press the

Machine Status

button.

Select the

Billing Meter/Print Report

tab.

Select

Reset Job Counters

Make a selection.

Reset

You can reset the counts for each feature. To reset, in the

confirmation screen that appears, select

Yes

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 341 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: