Wintriss dipro 1500, User Manual

Page: 87 / 129

Using DiPro 1500 in Program mode
DiPro 1500 User Manual 78 Ch 5 1092000
2. Select "Program on/off angle".
3. Key in the on angle and off angle using the Angle keys. A bar above the ruler
will move to the point you set for "on" and "off". The setting is also shown in
the box on the display. See "Angle keys" under "Using the keyboard" in
Chapter 3 for step-by-step instructions on how to set an on and off angle.
4. Press RESET to go back to the display showing the cam channels. You can
select another channel to set.
Here is an example of a display for a part blowoff set to 200° on, 300° off.
TOOL# 4400 PART BLOW OFF
0° 90° 180° 270° 360°
USE THE ANGLE KEYS
TO SET THE TIMIING,
PRESS RESET WHEN DONE.
ON 200°
OFF 300°
Selecting a channel and making a timed output setting
A timed output setting means that you set the stroke angle where you want the
channel to turn on and the time in milliseconds that you want the channel to stay
on. This means channel "on-time" is independent of press speed.
With "on-off" settings, the "on-time" decreases with press speed. Timed output
setting are recommended for controlling air, lubricators, etc. Also when you use
the timed setting, the channel will turn off after the set time even if the press stops
at the "on" angle. With "on-off" settings, the channel will stay on if the press stops
within the "on" setting for the channel. You could waste air or lube.
1. Select the channel you want to set from the list of cam channels. You will
see the display for choosing an on/off output or timed output setting.
2. Select "Program timed output". You see a display like this next one (with
the tool number and name of the channel you are seting shown at the top):
TOOL# 4400 PART BLOW OFF
0° 90° 180° 270° 360°
USE THE ANGLE KEYS TO SET
START ANGLE. USE OFF ANGLE
KEYS TO SET DURATION (MSEC).
PRESS RESET WHEN DONE.
ANGLE 0°
TIME 0
T0