Wintriss dipro 1500, User Manual

Page: 64 / 129

About the keyboard and displays
DiPro 1500 User Manual 55 Ch 3 1092000
Using the keyboard
The DiPro keyboard is made up of cursor keys, angle keys, a reset key, and an enter
key. The cursor keys are at the right. The angle keys are at the left.
RESET
ENTER
CURSOR ANGLE
ON
OFF
Cursor keys
You use these keys to move the selection bar over the item on the display you want
to select. You also use these keys to enter a number.
Moving the selection bar with the cursor keys
Every menu has an item highlighted (usually the first item). The selection bar—a
black bar—covers the item. The cursor keys control the selection bar.
Up,
( )
, Down
( )
These keys move the selection bar up and down a column of items on the display.
For instance, if there are four items on a display, and you want to get to the fourth
item, press the down key three times. You can also hold it down until you see the
selection bar over the fourth item. If you go too far, press the up key to go back.
When you hold a key down, the bar keeps moving.
If you have more than one column of items on a display, the bar will move from the
bottom of one column to the top of the next column. It will continue moving
through all the columns (and keep repeating) until you let up.
Right
( )
, Left
( )
If you have a display with two columns of items, you can move the selection bar
from the first column to the second column quickly by pressing the right key. To go
back to the first column, press the left key.
Sometimes a display has more columns than appear on the screen. A good example is
the tool number display. It can have up to 40 columns (for 200 numbers). However,
only four columns can appear on the screen at once. To see a new column, press the