Wintriss dipro 1500, User Manual

Page: 74 / 129

Using DiPro 1500 in Initialization mode
DiPro 1500 User Manual 65 Ch 4 1092000
3. To see more names on the list, push the "down" cursor key until the bottom name
on the list is highlighted, then keep pushing it. A new name will appear each time
you press the key.
There are 26 names listed. Use the "up" and "down" cursor keys to move
backward and forward through the list to select the name you want.
4. After you select a name for channel 1, you will go back to the previous menu
where you can select channel 2 and select a name for it. Continue in this way to
name all your cam channels.
The display showing your channels will not change to show the new channel
names. It will always say "channel 1", "channel 2", etc. This is so you always
know which channel you are naming. The channel names will appear in Program
and Run modes instead of the channel numbers.
Cam Channel Names
These are the names you can select for cam channels:
activate gag
outlet 2 retract slide
advance slide part blow off side action
bypass 1 part ejection spray lube
bypass 2 parts kicker zero cam
conveyor part lube channel 1
cutoff pilot release channel 2
feed advance ready 1 channel 3
feed complete ready 2 channel 4
outlet 1 recoiler