Wintriss dipro 1500, User Manual

Page: 63 / 129

About the keyboard and displays
DiPro 1500 User Manual 54 Ch 3 1092000
Selecting an item on a display
Here is the first display you see in programming mode—the Programming Menu.
Notice how the item—Program/load Tool numbers—is highlighted below.
THE CURRENTLY LOADED TOOL # IS 6800
USE CURSOR KEYS TO CHANGE SELECTIONS
PRESS ENTER TO ACCESS TOOL NUMBERS
SENSORS ENABLED
DISABLE SENSORS
PROGRAM/LOAD TOOL NUMBERS
Selection
bar
The letters are white and surrounded by a black box. The black box is the selection
bar. Whenever an item in a display is highlighted like this, it is the one selected. In
every menu you see, an item will be highlighted. You can move the selection bar to
any item on the screen using the cursor keys.
For instance, to highlight "Disable Sensors" above, you would press the cursor key
marked down (
). The selection bar would surround the words "disable sensors"
as shown.
THE CURRENTLY LOADED TOOL # IS 6800
USE CURSOR KEYS TO CHANGE SELECTIONS
PRESS ENTER TO DISABLE SENSORS
SENSORS ENABLED
DISABLE SENSORS
PROGRAM/LOAD TOOL NUMBERS
Bar moved
to second
item on
menu
If you pressed the (
) cursor key, the selection bar would move back to
"program/load tool number".
After you move the selection bar to the item you want , you press ENTER. DiPro
shows you the next display, allowing you to make another selection or make a
setting. A message at the bottom of every display tells you what to do next.
You will use the cursor keys and the ENTER key a lot to move through the menus,
and get your work done. It is fast and easy. See "Using the keyboard" next for a
description of all the keys. See Chapter 5—"Using DiPro 1500 in Program mode"
to learn what happens when you make the selections above.