Wintriss dipro 1500, User Manual

Page: 67 / 129

About the keyboard and displays
DiPro 1500 User Manual 58 Ch 3 1092000
Angle keys
You use these keys to set timing for your sensors and for your cam switch (if in-
stalled). For sensors, you use the keys to set the the ready signal (the degrees of the
stroke you expect the sensor to actuate). For cam timing, you use the keys to set the
degrees of the stroke where you want a cam channel to come on and go off.
These keys move a bar along the scale at the bottom of your screen in increments from
0° to 359°. They function only when you have selected a display to make or change
timing settings.
Angle on
The "angle on" keys move the left edge of the bar to the "on" setting. The right
( )
key moves the left edge to the right. The left
( )
key moves the left edge to the left.
Angle off
The "angle off" keys move the right edge of the bar to the "off" setting. The
( )
key moves the right edge to the right. The
( )
key moves the right edge to the left.
Example using the keys to make a setting
You want to set the ready signal for a sensor to 270° on and 20° off. You bring
up the display below on your screen. (See Chapter 5 for instructions on how to
bring up this display. This example only covers how to make on-off settings).
SENSOR 1 PART EJECTION GREEN
USE ANGLE KEYS
TO SET THE READY
SIGNAL. PRESS
RESET WHEN
DONE
0 90 180 270 360
0
0 ON
OFF
READY
Ready on
and off both
set to 0 before
any settings
are made
Setting ready on
Push the right
( )
"angle on" key once. You will see this display:
SENSOR 1 PART EJECTION GREEN
USE ANGLE KEYS
TO SET THE READY
SIGNAL. PRESS
RESET WHEN
DONE
0 90 180 270 360
1
0 ON
OFF
READY
When you push
right angle on key
once, bar appears
to show on at 1, off
at 0.