Wintriss dipro 1500, User Manual, Page: 86 / 129

Using DiPro 1500 in Program mode
DiPro 1500 User Manual 77 Ch 5 1092000
For existing tool number
Select the the tool number from the tool number display. Then select
"Modify the tool information" from the next display.
4. You will see this display after entering a tool number or selecting an existing
one:
TOOL# 4400
SET COUNTERS
SET SENSORS
SET CAMS
USE CURSOR KEYS TO CHANGE SELECTION
PRESS ENTER TO SELECT, RESET WHEN DONE
5. Select "Set cams". You see a display like the one here. This is your list of
cam channels. Now you can select and set a channel.
(Your cam channel names may have different names. Remember, you can
select your own names for cam channels in Initialization mode.)
PART BLOW OFF
FEED ADVANCE
PILOT RELEASE
SPRAY LUBE
PROGRAMMABLE CAMS
FOR TOOL # 4400
USE CURSOR KEYS
TO MAKE SELECTION
PRESS ENTER TO SET PART BLOW OFF
PRESS RESET WHEN DONE
Selecting a channel and making an on-off setting
An on-off setting means you set the stroke angle where you want the channel to
come on and the stroke angle where you want it to go off.
1. Select a channel from the list of cam channels. You will see the display below.
Notice that the tool number and channel name selected are shown in the display.
TOOL# 4400 PART BLOWOFF
USE CURSOR KEYS TO MAKE SELECTION
PRESS ENTER TO SET EVENT TYPE
PRESS RESET WHEN DONE
PROGRAM ON/OFF ANGLES
PROGRAM TIMED OUTPUT
DELETE CHANNEL SETTINGS