Wintriss dipro 1500, User Manual

Page: 73 / 129

Using DiPro 1500 in Initialization mode
DiPro 1500 User Manual 64 Ch 4 1092000
Select cam names
You can name your cam channels in Initialization mode to indicate their function (if the
cam option is installed).
SELECT = HIG ENTER
When we say SELECT in this manual, it means highlight the item
and press ENTER.
To name your cam channels:
1. Select "select cam names" from the Initialization menu. You will see this display:
SELECT CAM CHANNEL
TO NAME
USE CURSOR KEYS TO MAKE SELECTION
PRESS ENTER TO SET, RESET WHEN DONE
CHANNEL 1
CHANNEL 2
CHANNEL 3
CHANNEL 4
2. You can name any channel by selecting it. Start with channel 1. You will see this
display:
SELECT NAME FOR
CAM CHANNEL 1
USE CURSOR KEYS TO MAKE SELECTION
PRESS ENTER TO SET, RESET WHEN DONE
SPRAY LUBE
ZERO CAM
CHANNEL 1
CHANNEL 2
CHANNEL 3 MORE NAMES
The display shows a list of names with the present name for the channel—channel
1—highlighted. You can select this name if no other names fit. Usually you will
want to give the channel a name that fits its function. So check the list of names to
see if there is a name that fits the channel's function.