Wintriss dipro 1500, User Manual

Page: 20 / 129

Introduction to DiPro 1500
DiPro 1500 User Manual 11 Ch 1 1092000
Green quick check
A sensor input set to "green quick check" is almost the same as the "green" setting.
The sensor must turn on at least momentarily within the ready signal. However, a
green quick check sensor
cannot stay on or turn on outside the ready signal. The
sensor must turn on, then turn off within the ready signal. Otherwise, DiPro 1500
sends the stop signal to the press.
TDC
BDC
TDC
BDC
TDC
BDC
OK
Sensor stays on after
the end of ready signal.
Stop signal sent just
after ready signal ends.
not allowed
(press stops)
not allowed
(press stops)
not allowed
(press stops)
Sensor actuates
inside ready signal Sensor turns on outside
ready signal. Stop signal
sent when sensor turns
on. Sensor never turns on.
Stop signal sent at end
of ready signal.
= Ready
Signal
KEY
= Sensor
Actuation
TDC
BDC
Figure 1-5. How DiPro interprets signals from a sensor set to "green quick check."
Green constant
When you set a sensor input to "green constant," the sensor must turn on before the
ready signal begins and turn off after the ready signal ends. That is, it must stay
actuated constantly during the ready signal. However, the sensor must turn off, at
least momentarily, outside the ready signal.
TDC
BDC
TDC
BDC
TDC
BDC
TDC
BDC
Sensor doesn't turn off
outside ready signal.
Stop signal sent at start
of next ready signal. Sensor never turns
on. Stop signal sent
at beginning of ready
signal.
OK
not allowed
(press stops)
Sensor turns off before
ready signal ends. Stop
signal sent when sensor
turns off. Sensor stays on dur-
ing complete ready
signal.
not allowed
(press stops)
not allowed
(press stops)
Figure 1-6. How DiPro interprets signals from a sensor set to "green constant."