Suzuki GA413, Service Manual

Page: 771 / 1246

REAR SUSPENSION 3E-1
GA413
supple
SECTION 3E
REAR SUSPENSION
NOTE:
For the descriptions (items) not found in this section, refer to the same section of the Service Manual
mentioned in the FOREWORD of this manual.
All suspension fasteners are an important attaching part in that it could affect the performance of vital
parts and systems, and/or could result in major repair expense. They must be replaced with one of
the same part number or with an equivalent part if replacement becomes necessary. Do not use a re-
placement part of lesser quality or substitute design. Torque values must be used as specified during
reassembly to assure proper retention of this part.
Never attempt to heat, quench or straighten any suspension part. Replace it with a new part, or dam-
age to the part may result.
CONTENTS
GENERAL DESCRIPTION 3E- 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL DESCRIPTION
Rear suspension is a type which consists of coil springs, rear axle, shock absorbers, lateral rod and trailing arms.
The lateral rod is installed to the body and axle by using bushes so as to prevent axle movement in the lateral direc-
tion.
The trailing arms which are connected with the axle are installed to the body by using a bush so that axle moves
up and down with the bush as its supporting point.
The shock absorber is installed between the body and axle to absorb up-and-down movement of the vehicle body.
3E