Suzuki GA413, Service Manual

Page: 169 / 1246

BUMP STOPPER/SPRING UPPER SEAT
CHECK
Inspect for cracks, deformation or damage.
Replace any defective part.
LEAF SPRING BUSHING AND SPRING
SHACKLE BUSHING CHECK
Inspect for wear and breakage.
Replace if defective.
When spring shackle bushings are not worn and yet abnormal
sound is noted while driving, remove bushings and apply
grease.
REAR SUSPENSION FASTENER CHECK
Check each bolt and nut fastening suspension parts for tightness.
Tighten loose one, if any, to specified torque by referring to TIGHT-
ENING TORQUE SPECIFICATIONS of this section.
WHEEL DISC, NUT & BEARING CHECK
Inspect each wheel disc for dents, distortion and cracks.
A disc in badly damaged condition must be replaced.
Check wheel nuts for tightness and, as necessary, retighten to
specification.
Tightening Torque
(a): 85 N·m (8.5 kg-m, 61.5 lb-ft)
Check wheel bearings for wear. When measuring thrust play,
apply a dial gauge to axle shaft center.
Thrust play limit “a”: 0.8 mm (0.03 in.)
When measurement exceeds limit, replace bearing.
By rotating wheel actually, check wheel bearing for noise and
smooth rotation. If it is defective, replace bearing.
REAR SUSPENSION 3E-5