Suzuki GA413, Service Manual

Page: 497 / 1246

HIGH-TENSION CORD
REMOVAL
1) Remove high-tension cord from ignition coil assembly while
gripping its cap.
2) Pull out high-tension cord from spark plug while gripping its cap.
CAUTION:
Pull out each connection by gripping cap portion so
as not to damage their inside wire (resistive conduc-
tor).
1. Ignition coil assembly
2. High-tension cord
CORRECT WRONG
INSPECTION
Measure resistance of high-tension cord by using ohmmeter.
High-tension cord resistance: 4 – 10 k /m (1.2 – 3.0 k /ft)
If resistance exceeds specification, replace high-tension cord(s).
1. High-tension cord 2. Ohmmeter
INSTALLATION
Install high-tension cord to spark plug and ignition coil assembly
while gripping its cap.
1. Ignition coil assembly
2. High-tension cord
CAUTION:
Never attempt to use metal conductor high-tension
cord(s) as replacing parts.
Insert each cap potion fully when installing high-ten-
sion cords.
IGNITION SYSTEM 6F-7