Suzuki GA413, Service Manual

Page: 733 / 1246

DISABLING AIR BAG SYSTEM
1) Turn steering wheel so that vehicle’s wheels (front tires) and
pointing straight ahead.
2) Turn ignition switch to “LOCK” position and remove key.
3) Remove “AIR BAG” fuse from fuse box.
4) Disconnect Yellow connector of contact coil and combination
switch assembly.
i) Release locking of lock lever.
ii) After unlocked, disconnect connector.
5) If equipped with passenger air bag (inflator) module, pull out
glove box while pushing its stopper from both right and left sides
and disconnect Yellow connector of passenger air bag (inflator)
module.
i) Release locking of lock lever.
ii) After unlocked, disconnect connector.
NOTE:
With “AIR BAG” fuse removed and ignition switch ON, “AIR
BAG” warning lamp will be ON.
This is normal operation and does not indicate a air bag
system malfunction.
1. Fuse box
2. “AIR BAG” fuse
3. Yellow connector of contact coil and combination switch
assembly
4. Yellow connector of passenger air bag (inflator) module
(if equipped)
5. Steering support member
6. Harness cover
ENABLING AIR BAG SYSTEM
1) Turn ignition switch to “LOCK” position and remove key.
2) Connect Yellow connector of contact coil and combination
switch assembly, and be sure to lock connector with lock lever.
i) Connect connector.
ii) Lock connector with lock lever.
1. Fuse box
2. “AIR BAG” fuse
3. Yellow connector of contact coil and combination
switch assembly
AIR BAG SYSTEM 10B-39