Suzuki GA413, Service Manual

Page: 737 / 1246

AIR BAG WIRE HARNESS AND CONNECTORS
Air bag wire harness can be identified easily as it is covered with
a yellow and black protection tube. Be very careful when handling
it.
When an open in air bag wire harness, damaged wire harness,
connector or terminal is found, replace wire harness, connectors
and terminals as an assembly.
When installing it, be careful so that the air bag wire harness is
not caught or does not interfere with other parts.
Make sure all air bag system grounding points are clean and
grounds are securely fastened for optimum metal-to-metal con-
tact. Poor grounding can cause intermittent problems that are
difficult to diagnose.
1. Air bag wire harness
2. Ground
3. SDM case ground
DISPOSAL
Do not dispose of the live (undeployed) air bag (inflator) module(s).
When disposal is necessary, be sure to deploy the air bag accord-
ing to deployment procedure described under AIR BAG (INFLA-
TOR) MODULE DISPOSAL.
WARNING:
Failure to follow proper air bag (inflator) module disposal
procedures can result in air bag deployment which could
cause personal injury. Undeployed air bag (inflator) mod-
ule must not be disposed of through normal refuse chan-
nels.
The undeployed air bag (inflator) module contain sub-
stances that can cause severe illness or personal injury
if the sealed container is damaged during disposal.
AIR BAG SYSTEM 10B-43