Suzuki GA413, Service Manual

Page: 562 / 1246

15) Press-fit main shaft rear bearing (2) and fit circlip into groove
in main shaft (3).
Special Tool
(A): 09925-18011
16) Install speed sensor rotor (4) and fit circlip (1).
17) Assemble high speed synchronizer hub (2), sleeve (1),
springs (4) and keys (3).
a) Slide hub in sleeve so that punch marked side (6) of hub
and groove machined side of sleeve face opposite direc-
tion.
b) Insert keys in hub slots with depression side of keys face
center of hub.
c) Install springs to internal circle of key locations with spring
end gaps apart at angles about 120 degrees each other.
Synchronizer spring installation position
: A = B
[C]: Input shaft side (forward)
5. Groove
7. 3rd gear
MANUAL TRANSMISSION 7A-23