Suzuki GA413, Service Manual

Page: 597 / 1246

6) Measure preload of pinion with spring balance or torque wrench
and check composite preload of pinion bearing and side bear-
ing.
Special Tool
(C): 09922-75222
NOTE:
Standard preload is within the range given in graph be-
low, which should be read as follows.
Example:
When preload of bevel pinion is 2.6 kg/5.73 Ib, acceptable
composite preload of both pinion bearings and side bear-
ings should be between 2.8 and 3.2 kg/6.17 and 7.05 Ib.
1. Spring balance
2. Torque wrench
3. Universal joint flange
4. Socket with adapter
7F-14 DIFFERENTIAL