Suzuki GA413, Service Manual

Page: 568 / 1246

5) Install upper case to lower case by matching 3 shift forks (1) with
3 grooves in synchronizer sleeve (2) on main shaft respectively.
6) Tighten case bolts to specification. Install ground cable through
right-rear case bolt. Install gear control cable bracket (3) and
back-up light switch harness clamp (4).
Tightening Torque for transmission case bolt and back-up
light switch:
23 N·m (2.3 kg-m, 17.0 lb-ft)
5. Back-up light switch
EXTENSION CASE
1) Check to ensure that knock pins (1) are fitted.
2) Install extension case seal (2) so that end surface of oil seal be-
comes flush with that case. Apply grease to extension case seal
lip.
“A”: Grease 99000-25010
Special Tool
(A): 09913-85210
3) Clean surface of extension case to mate with transmission case
and uniformly apply sealant.
Sealant 99000-31110
4) Make sure that 3 shift shafts are in neutral position.
5) Install extension case (1) to transmission case.
6) Tighten case bolts to specification.
Tightening Torque
(a): 23 N·m (2.3 kg-m, 17.0 lb-ft)
MANUAL TRANSMISSION 7A-29