6) Stretch the deployment harness from the driver or passenger
air bag (inflator) module to its full length 10 m (33 ft).
Special Tool
(A): 09932-75030
7) Place a power source near the shorted end of the deployment
harness. Recommended application: 12 Volts minimum, 2
amps minimum. A vehicle battery is suggested.
8) Verify that the area around the driver or passenger air bag (in-
flator) module is clear of all people and loose or flammable ob-
jects.
9) In case of driver air bag (inflater) module:
Verify that the driver air bag (inflator) module is resting with its
vinyl trim cover facing up.
In case of passenger air bag (inflator) module (if equipped):
Verify that the passenger air bag (inflator) module is firmly and
properly secured in passenger air bag (inflator) module de-
ployment fixture (special tool).
10) Connect the air bag (inflator) module to the deployment har-
ness connector and lock connector with lock lever.
11) Notify all people in the immediate area that you intend to
deploy the air bag (inflator) module.
NOTE:
When the air bag deploys, the rapid gas expansion will
create a substantial report. Wear suitable ear protec-
tion. Notify all people in the immediate area that you in-
tend to deploy the air bag (inflator) module and suitable
ear protection should be worn.
When the driver air bag deploys, driver air bag (inflator)
module may jump about 30 cm (1 ft) vertically. This is a
normal reaction of them to the force of the rapid gas ex-
pansion inside the air bag.
After the air bag (inflator) module has been deployed,
the surface of the air bag may contain a powdery resi-
due. This powder consists primarily of cornstarch
(used to lubricate the bag as it inflates) and byproducts
of the chemical reaction.
For driver air bag (inflator) module
For passenger air bag (inflator) module (if
equipped)
1. Stretch deployment harness to full length 10 m (33 ft).
2. Connect connectors.
3. Power source (12V vehicle battery)
4. Short the two deployment harness leads.
10B-50
AIR BAG SYSTEM
Summary of Contents for GA413
