Suzuki GA413, Service Manual

Page: 408 / 1246

6) Remove lead wire, fuel tube and/or grommets as necessary.
CAUTION:
When removing grommet from fuel tube or bracket
sub assembly, be very careful not to cause damage to
grommet installed section (sealed section in bore).
Should it be damaged, replace it with new one, or fuel
will leak from that part.
7) Remove housing from bracket sub assembly by opening its
snap-fit parts.
REASSEMBLY
NOTE:
Use of new parts is recommended for all parts other than fuel
pump and fuel level gauge.
Also, be sure to use new grommets, or oil leakage may occur.
1) Install lead wire, spacer and new grommet to fuel pump. Check
that no foreign object is caught between grommet and fuel
pump.
2) Apply engine oil and around grommet and install fuel tube.
Check that no foreign object is caught between grommet and
fuel tube.
1. Apply oil
3) Fit cushion and bracket to fuel pump.
1. Fuel pump
2. Cushion
3. Bracket
ENGINE FUEL 6C-13