Suzuki GA413, Service Manual

Page: 186 / 1246

WHEELS AND TIRES 3F-1
SECTION 3F
WHEELS AND TIRES
NOTE :
All wheel fasteners are important attaching parts in that they could affect the performance of vital parts
and systems, and/or could result in major repair expense. They must be replaced with one of the same part
number or with an equivalent part if replacement becomes necessary. Do not use a replacement part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to assure
proper retention of all parts.
There is to be no welding as it may result in extensive damage and weakening of the metal.
CONTENTS
GENERAL DESCRIPTION 3F-1 . . . . . . . . . . . . . . . . . .
Tires 3F-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheels 3F-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacement Tires 3F-1 . . . . . . . . . . . . . . . . . . . . . . .
Wheels Replacement 3F-2 . . . . . . . . . . . . . . . . . . . . .
Metric Lug Nuts and Wheel Studs 3F-2 . . . . . . . . . .
DIAGNOSIS 3F-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnosis Table 3F-3 . . . . . . . . . . . . . . . . . . . . . . . . . .
Balancing Wheels 3F-3 . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE AND
MINOR ADJUSTMENTS 3F-4 . . . . . . . . . . . . . . . . . . . .
Wheel and Tire 3F-4 . . . . . . . . . . . . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE 3F-6 . . . . . . . . . . . . . . . . . . . .
Wheel 3F-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tire 3F-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIGHTENING TORQUE
SPECIFICATIONS 3F-7 . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL DESCRIPTION
TIRES
This vehicle is equipped with 155 R13C-6PR.
The tires are of tubeless type. The tires are designed to operate satisfactorily with loads up to the full rated load
capacity when inflated to the recommended inflation pressure.
Correct tire pressures and driving habits have an important influence on tire life. Heavy cornering, excessively
rapid acceleration, and unnecessary sharp braking increase tire wear.
WHEELS
Standard equipment wheels are following steel wheel.
13
4.00 B
REPLACEMENT TIRES
When replacement is necessary, the original equipment type tire should be used. Refer to the Tire Placard. Re-
placement tires should be of the same size, load range and construction as those originally on the vehicle. Use
of any other size or type tire may affect ride, handling, speedometer/odometer calibration, vehicle ground clearance
and tire or snow chain clearance to the body and chassis.
It is recommended that new tires be installed in pairs on the same axle. If necessary to replace only one tire, it should
be paired with the tire having the most tread, to equalize braking traction.
3F